秋霞最新高清无码鲁丝片

 Product Center

 GSM mobile phone remote control machine

GSM mobile phone remote control machine

technical parameter

Power supply voltage: 220 V ± 20%
SNR ≤ 60dB
Body size: 265 * 170 * 70mm
Standby time consumption: ≤ 35W
Rated impedance: 10 Ω

Product introduction

 11 (1).jpg The necessary configuration of smart broadcast, remote control broadcast system of mobile phone, and calling the mobile phone number in the control machine by specifying the mobile phone number,
The whole launch system will start automatically for calling operation.

Function introduction
1. 32 mobile phones or phone numbers can be preset as "call list" numbers. After the "call list" function is turned on, only the input numbers can be entered and broadcast remotely.
2. With the function of opening the call list, all calls can be accessed and broadcast remotely.
3. 6-digit password, strong security function. The system has rich contents, including display brightness, ringing time and volume, etc
4. The product is highly intelligent, and can directly store the number in the call record into the white list (correct input of operation password is required).
5. It has the function of opening amplifier in advance to reduce switching noise.
6. With the manual function, you can press the manual key to enter the manual mode. At this time, the amplifier (power amplifier) will be automatically turned on, and then press the manual button to return to the automatic standby state. The manual function will automatically time,
After two hours, the amplifier will be turned off automatically.
7. The external antenna has high receiving sensitivity and good effect.
8. No need for backup battery, power on automatically, stable performance.

Quick use guide

1. Open the bottom cover, correctly install the mobile phone card with phone charges (the mobile phone card is open, open and handle gently, pay attention to installation, so as to avoid damage), and pull out the antenna of the machine,
Keep away from the machine as far as possible (to prevent the interference of the antenna to the audio), and close to the window or door as far as possible (to increase the signal strength and improve the receiving effect).
2. Plug the power plug of the loudspeaker (power amplifier) into the power socket at the back of the machine, and turn on the power switch of the amplifier (power amplifier). Plug one end of the signal line into the
In the unit, plug in the audio outlet at the appropriate position, and then plug the audio into the audio outlet.
3. Turn on the power, turn on the power switch, and set the white list of mobile phone numbers.

Key description
1. After the light is turned on, the system will automatically start up and enter the standby mode (it takes about 30 seconds for the screen to appear after the power light is on).
2. Key Description: 18 buttons are set in the machine, which are: manual, up, down, confirm, delete, return, *, #, and 1234567890
3. Press the manual key to enter the manual state, and then press the manual key again to exit the manual state. In the manual state, the amplifier (power amplifier) will be automatically turned on
It can be operated. In manual mode, it will automatically exit the manual state after 2 hours
4. Up key and down key can move up or down items to set. In standby mode, up key can enter setting interface, and down key can enter fairy tale recording interface
5. OK, delete and return keys. The OK key can enter the setting interface in standby mode, and confirm and save items in other states. Delete key can delete the input error item,
You can answer or end a call in ring and call status. Return key to return to the previous menu.
6 number key can be directly pressed when inputting password or telephone number.

Rural radio broadcasting system: brigade broadcast propaganda, straw burning ban, public meeting broadcast notice, publicity and education guidance( It can share broadcast equipment at township and village level

Campus wireless broadcasting system: ringing the bell regularly before and after class, listening test of CET-4 and Band-6, campus radio station

Community radio broadcasting system: Community Cultural Broadcasting, publicity and education notice, fire warning

Radio broadcasting system of Scenic Area Park: background music playing, notice of missing, fire warning

  For more site solutions, please consult online customer service or marketing leader Manager Wang 130-8360-8988

Three step installation:

1. First, installation method of transmitter and transmitter antenna http://www.hnyihuadq.com/news/69.html

2. Second, the assembly steps of the high pitched loudspeaker http://www.hnyihuadq.com/news/66.html

 

3. Third: installation method of receiver and horn http://www.hnyihuadq.com/news/70.html

Product Center

contact us

You only need a phone call, we will provide the most suitable products, so that you spend the least money to achieve the best results!

Market leader:
130-8360-8988 (manager Wang)
QQ online:
one billion forty-four million two hundred and sixty-nine thousand eight hundred and forty-seven
National after sales telephone number:
400-616-9608
Zhengzhou office:
18th floor, unit 4, building 1, Zhongyuan new town, intersection of Tongbai Road and Longhai Road, Zhongyuan District
site of a factory:
Intersection of Gongye Avenue and Songhuajiang Avenue in Shangqiu City, Henan Province

Yucheng Yucheng Aerospace Electronic Technology Co., Ltd. yuicp No. 16037886-1 business consultation: 130-8360-8988 technical support: Founder network technology